| 101-1063
|
 |
| Engine mount - New |
| Used on B bodies from 1966-72, C bodies from 1966-73 and E bodies from 1970-74 Use 2 per car. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 119-1000
|
 |
| Engine Support Brackets 66-72B 66-73C 70-74E |
| Shown above are our most popular brackets, Chrysler # 2536132, for the right side, and 2863751 for the left. Notice the left hand bracket will have a tube welded across the channel area of the mount (shown above on the right) making it easy to distinguish from the right side bracket. These were used on B bodies from 1966-72, C bodies from 1966-73 and E bodies from 1970-74. The right hand bracket (2536132) was also used on the passenger side of big block A bodies from 1967-69 with our 101-1063 insulator. Great replacement brackets for missing or damaged originals on factory big block cars, or for transplanting a big block into a small block car (except A-body) of the above years and body styles. No k member changes are required. Use with our 101-1063 insulators. These are sold as a set including one right hand bracket and one left hand bracket. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 116-1000
|
 |
| Dynatech Engine Mounts (pair) - New |
| The engineers at Dynatech have taken our most popular mounts and converted them into a 21st century design which provides the best of all worlds: The vibration dampening ability of a stock rubber mount with the torque handling ability of a solid steel mount. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 109-1523
|
 |
| Bolt Kit - Engine Support Brackets to Block |
| Finally, a hard to find reproduction of the factory bolts that will allow you to bolt your engine support brackets to the motor mount ears which are cast into the side of your engine block. These have the thin style washers and fine thread just like the factory originals that Chrysler used. And because they are US made from high strength steel, they work great for those high horsepower applications as well. One kit contains six bolt/washer/nut assemblies, enough to do one complete engine (both sides.) |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 101-1067
|
 |
| Engine Mount - Early Right - New |
| Used on late '62 to '65 B bodies on the Right (passenger) side only. This mount is also used on 1966-71 B bodies, and 70-71 E bodies with 426 HEMI'S ONLY, AND 1965 C bodies, again for the RIGHT side only. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 101-1068
|
 |
| Engine Mount - Early "B" Body Left - New |
| Used on late '62 to '65 B bodies on the Left (drivers) side only. Can also be used on left hand applications for original big block 1965 C body and 1967-69 A bodies, but ONLY when used with our special 119-1006 left hand bracket. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 101-1062
|
 |
|
|
| 119-1001
|
 |
|
|
| 127-1031
|
 |
| Engine Cradle - Heavy Duty - USA Made |
| Shown here is our super heavy duty USA made engine cradle stand. This cradle is made specifically for the big block Mopar wedge engine. It won't fit any other engine, and that's exactly the way we wanted it. Featuring a frame that's fully welded from 1 1/4" box tubing in the USA, then gloss black powder coated, this cradle is designed for shops, shipping and other heavy uses. Other "universal" type cradles designed to fit multiple engines and made overseas can't begin to hold a candle to this big block Mopar only unit. A great additionfor any shop, racer, or works great for shipping an engine block or complete crate engine. Lag screw it to your pallet or crate, and your engine won't go anywhere during travel. Also, unit collapes for easy shipping and storage. Another great 100% USA MADE part available exclusively through 440 Source at below wholesale pricing! |
| In Stock |
|
|
|
|
|
|
|
|
|
|
