Oil Filters-store.440source.com

ACCOUNT INFO

/ /

Image

Item #

Description

Price

138-1004

Heavy Duty Oil Filter - 5" long
These heavy duty filters feature a very nice jet black finish with our 440 Source logo as shown. They have extra pleating inside for efficient, high flow filtering and are the factory length 5" long version. A great choice at a great price!

In Stock

110-1004

Billet Aluminum Oil Filter - ReUsable
Our new billet aluminum reusable oil filter will last a lifetime. Never buy another oil filter again. The two piece housing unscrews to reveal a washable filter element of finely woven stainless steel mesh. These fiter all particles down to 45 microns, and should be washed every 3000 miles. Also features full o-ring seals and integral magnet to trap any large particles (great for inspection during cleaning.) A super nice product now available at a fraction of the price of similiar units on the market. Click on "View additional images" button to see more pictures of the filter element, etc.

In Stock

138-1005

Heavy Duty Oil Filter - Extra Capacity
We also offer these hard to find EXTRA CAPACITY heavy duty oil filters. The canister height on these has been increased an extra 1 1/2 inches, to about 7 inches to make sure the oil pump has plenty of capacity. They are supplied in a very nice jet black finish with our logo, as shown. Other than a deep sump oil pan, this is the only way to increase the capacity of your oil system, and it's kept right at the supply side of the oil pump, just where it's needed most. A nice detail and an inexpensive way to get a little extra oil that most builders overlook. Don't forget to check to make sure you have clearance in the chassis for the extra length.

In Stock

200-1174

Adapter, Oil pump cover to oil filter base
We offer this hard to find adapter, which screws into the front of the oil pump and allows the oil filter to screw on. The filter side of the adapter is 3/4"-16 thread. Great for replacing missing or damaged originals. Originally sold as Chrysler part numbers 1739619 and 4095283. Shown as item #5 (circled in red) in the parts diagram.

In Stock

109-1584

Factory Style Magnetic Drain Plug
We've reproduced the 100% correct original factory drain plugs, BUT we've taken it a step further and added a magnet to the backside to capture any metal shavings or debris which might be circulating around the engine, to prevent it from causing any more potential damage. Super cheap insurance in a 100% factory looking item! Although it's a small detail, restoration experts and real Mopar guys know what a correct drain plug should look like, and all the aftermarket ones do not have the recessed center area like the factory ones do. Originally supplied by Chrysler as part number 2125890 and 2268513.

In Stock

109-1585

Factory Style Drain Plug
We've reproduced the 100% correct original factory drain plugs, which were originally supplied when our Mopars were new and rolled off the assembly lines. Although it's a small detail, restoration experts and real Mopar guys know what a correct drain plug should look like, and all the aftermarket ones do not have the recessed center area like the factory ones do. Originally supplied by Chrysler as part number 2125890 and 2268513.

In Stock

Heavy Duty Oil Filter - 5" long

In Stock

Billet Aluminum Oil Filter - ReUsable

In Stock

Heavy Duty Oil Filter - Extra Capacity

In Stock

Adapter, Oil pump cover to oil filter base

In Stock

Factory Style Magnetic Drain Plug

In Stock

Factory Style Drain Plug

In Stock