Thermostats, Temp Sending Units and Accessories-store.440source.com

ACCOUNT INFO

/ /

Image

Item #

Description

Price

138-1008

Thermostat - High Flow - 160 Degrees
Our new HIGH FLOW thermostats are great for those high horsepower applications where the engine is putting out more power, and therefore making more heat than factory. These fit all years and models of big blocks, including Hemis.

In Stock

138-1009

Thermostat - High Flow - 180 degrees
Our new HIGH FLOW thermostats are great for those high horsepower applications where the engine is putting out more power, and therefore making more heat than factory. These fit all years and models of big blocks, including Hemis.

In Stock

200-1150

BLACK Heater Hose Nipple Set
Don't forget heater hose nipples to go with your water pump setup. These are supplied in a very nice BLACK finish and fit ALL of our aftermarket aluminum housings. They are factory correct for 1964-69 cars. They use 5/8" heater hose.

In Stock

200-1092

Heater Hose Nipple Set
Don't forget heater hose nipples to go with your water pump setup. These fit ALL of our aftermarket aluminum housings, and are factory correct for 1964-69 cars. They use 5/8" heater hose, and are zinc plated for great corrosion resistance.

In Stock

200-1187

304 Stainless Heater Hose Nipple Set
Our new STAINLESS STEEL heater hose nipples are fully machined from solid blocks of 304 Stainless steel. This means they will never rust or corrode, and as you can see from the picture, they look amazing! These fit ALL of our aftermarket aluminum housings, and are factory correct for 1964-69 cars. They use 5/8" heater hose.

In Stock

101-1077

Water Pump Housing Pipe Plug Kit
We carry a convenient NPT pipe plug kit, which includes all the pipe plugs which could possibly be needed for a water pump housing.

In Stock

112-1006

Water Pump Housing to Block Gaskets - Set of 2
We also carry water pump housing to engine block gaskets. Sold as a pair. These are the same gaskets that come in our complete gasket sets. We now offer them separately for convenience when doing water pump or cam swaps, etc.

In Stock

112-1008

Water Pump to Housing Gasket
We also carry water pump to housing gaskets. These are the nice thick ones which work great with our water pumps & housing combos. Use one per engine.

Special Pricing Available In Stock

112-1009

Water Neck Gasket
We now offer replacement water neck gaskets. These are made from compressed fiber. They are the same gaskets which are included in our complete gasket kit. We now offer them separately for convenience when doing thermostat or water pump swaps, etc.

In Stock

138-1028

Molded Upper Radiator Hose
Our molded factory replacement radiator hoses are a perfect fit for your B, E or C body. This is the top 1 1/2" diameter hose which fits radiators with the top hose on the passenger side. See additional pictures for how it looks once installed. Great quality at a great price.

In Stock

138-1029

Molded Lower Radiator Hose
Our molded factory replacement radiator hoses are a perfect fit for your B, E or C body. This is the lower 1 3/4" diameter hose which fits radiators with the bottom hose on the drivers side. Great quality at a great price.

In Stock

138-1015

Water Temp Sending Unit - W/ Gauge - Disc Type
We offer water temp sending units for factory and most aftermarket electrical gauges. These fit in the small 1/8" pipe threads on the top drivers side of our aluminum water pump housings, and work with cars which included factory temp gauges. There are two different versions of this sending unit. This one uses a small disc on the top, which a spade connector slips over and locks onto. The other style (listed separately) has a threaded stud which uses an eyelet on the end of the wire, and his held on by a nut. Order the type you need depending on which connector you have on the end of your wiring harness. Another often overlooked part which can be hard to find at times. Don't let these little items hold up your build. These are a premium part, still made in the good old US of A.

In Stock

138-1027

Water Temp Sending Unit - W/ Gauge - Threaded
We offer water temp sending units for factory and most aftermarket electrical gauges. These fit in the small 1/8" pipe threads on the top drivers side of our aluminum water pump housings, and work with cars which included factory temp gauges. There are two different versions of this sending unit. One uses a small disc on the top, which a spade connector slips over and locks onto. The other style (this one) has a threaded stud which uses an eyelet on the end of the wire, and his held on by a nut. Order the type you need depending on which connector you have on the end of your wiring harness. Another often overlooked part which can be hard to find at times. Don't let these little items hold up your build. These are a premium part, still made in the good old US of A.

In Stock

121-1017

Thick Flange Water Neck - Chrome Plate - New
Offered at a great price for budget builds, our chrome steel thermostat housing features an extra thick flange for better sealing. Factory thermostat housings measure approx. .350" thick, which can lead to warpage and coolant leaks. Our super thick flange versions measure about .475" (nearly a half inch thick!!) to hold a perfectly flat surface for positive gasket sealing even under extreme conditions. These come complete with gasket and bolts (a $12 value when sold separately). The plating and overall quality on these is among the best we've ever seen. These use a 1 1/2" radiator hose, and fit all years and models of big blocks, including Hemis.

In Stock

109-1519

Bolt Kit - Water Neck or Fuel Pump Block-off Plate (2)
The GOOD Option. Shown here is our package of 2 bolts and matching washers which are used to attach the thermostat housing (also called the water neck) to the water pump housing. These can also be used with either our billet aluminum or chrome steel fuel pump block-off plates.

Special Pricing Available In Stock

109-1550

Bolt Kit - Water Neck/ Fuel Pump Blockoff - Performance 12pt
Our Performance 12 point bolt kits are a nice looking option that features grade 8 strength, black oxide coating, and with a price that doesn't break the bank. This kit includes the two bolts and washers used to attach the thermostat housing (also called the water neck) to the water pump housing. These can also be used with either our billet aluminum or chrome steel fuel pump block-off plates. Custom matching, small diameter washers are also included with this kit.

In Stock

200-1166

-12 AN Water Pump Block Adapters
These CNC machined adapters bolt onto the engine block in place of a regular cast water pump housing, and convert the water passages into a -12 AN "0-ring"fitting. This then allows you to use reguar AN style braided lines to route the cooling lines however you prefer. This can include things such as an externally mounted electric water pump, reverse flow (so that the heads are cooled first, before the cylinders,) etc. Also, if you are using a gear drive, belt drive, or thicker timing cover that does not fit under a cast water pump housing, these are a great solution for that as well. Supplied in a pair (1 left hand and 1 right hand piece.) A cool part at a great price!

In Stock

Thermostat - High Flow - 160 Degrees

In Stock

Thermostat - High Flow - 180 degrees

In Stock

BLACK Heater Hose Nipple Set

In Stock

Heater Hose Nipple Set

In Stock

304 Stainless Heater Hose Nipple Set

In Stock

Water Pump Housing Pipe Plug Kit

In Stock

Water Pump Housing to Block Gaskets - Set of 2

In Stock

Water Pump to Housing Gasket

Special Pricing Available In Stock

Water Neck Gasket

In Stock

Molded Upper Radiator Hose

In Stock

Molded Lower Radiator Hose

In Stock

Water Temp Sending Unit - W/ Gauge - Disc Type

In Stock

Water Temp Sending Unit - W/ Gauge - Threaded

In Stock

Thick Flange Water Neck - Chrome Plate - New

In Stock

Bolt Kit - Water Neck or Fuel Pump Block-off Plate (2)

Special Pricing Available In Stock

Bolt Kit - Water Neck/ Fuel Pump Blockoff - Performance 12pt

In Stock

-12 AN Water Pump Block Adapters

In Stock