Spark Plug Wires, Wire Supports & Accessories-store.440source.com

ACCOUNT INFO

/ /

Image

Item #

Description

Price

117-1028

Performance Spark Plug Wires - For MALE type distributor cap
Our new performance plug wires feature a Kevlar core with ultra-low resistance spiral wound Copper-Nickel Alloy (CuNi) (3:1) conductor. They have an impressive turn ratio of 100:1, lowering the wire resistance to 150 ohms per foot. Almost all the other "performance" wire sets out there are 8.5mm with 500 ohms per foot, so these are a premium setup compared to that. The conductor is then protected with a high dielectric strength co-polymer compound coating to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The wire is then coated again in a highly durable silicone and EPDM sleeve. All terminals are protected by extra thick silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. These come fully assembeled, with each wire cut to length to fit a Big Block Mopar engine. This set fits a MALE distributor cap, with aftermarket type (male spark plug-like towers) on the cap.

In Stock

117-1027

Performance Spark Plug Wires - For Female type Dist. Cap
Our new performance plug wires feature a Kevlar core with ultra-low resistance spiral wound Copper-Nickel Alloy (CuNi) (3:1) conductor. This is the good, thick stuff, with a 10mm diameter and an impressive turn ratio of 100:1, lowering the wire resistance to 150 ohms per foot. Almost all the other "performance" wire sets out there are 8.5mm with 500 ohms per foot, so these are a premium setup compared to that. The conductor is then protected with a high dielectric strength co-polymer compound coating to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The wire is then coated again in a highly durable silicone and EPDM sleeve. All terminals are protected by extra thick silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. These come fully assembeled, with each wire cut to length to fit a Big Block Mopar engine. This set fits a FEMALE distributor cap, similiar to factory type caps.

In Stock

121-1037

Spark Plug Wire Separator Kit - NEW
We offer these sets of spark plug wire separators. Made from high grade plastic which helps insulate the plug wires and reduce shorts and crosstalk.

In Stock

121-1038

Spark Plug Wire Support & Separator Kit - NEW
We offer this set of spark plug wire separators, which help to route the plug wires neatly and cleanly from the distributor, over the valve covers, and to the plugs.

In Stock

117-1017

Replacement Distributor Cap - RED FEMALE
We also offer female (stock type looking) replacement caps for our distributors. This is a RED COLOR replacement cap for our distributors. Uses FEMALE type terminals, (similar to the factory type.) Great for those who want to run our modern billet distributors, but keep more of the "factory" type look of female plug wires. NOTE: Due to different suppliers, there are two styles of distributor caps used on our distributors. On the inside edge of the cap, there is an approximately 3/8" wide locating tang which fits into a groove or notch on the distributor body. One style has the locating tang directly in line with the attaching clip which holds the distributor cap on. The other style has the locating tang about 1" away (offset) from the attaching clip. When ordering a replacement cap, please check which style you need and order the correct one. This cap has the locating tang IN LINE with the attaching clip.

In Stock

117-1016

Replacement Distributor Cap - BLUE MALE
We also offer replacement caps for our distributors. This is a BLUE COLOR replacement cap for our distributors. Uses MALE type terminals, (similar to a spark plug.) NOTE: Due to different suppliers, there are two styles of distributor caps used on our distributors. On the inside edge of the cap, there is an approximately 3/8" wide locating tang which fits into a groove or notch on the distributor body. One style has the locating tang directly in line with the attaching clip which holds the distributor cap on. The other style has the locating tang about 1" away (offset) from the attaching clip. When ordering a replacement cap, please check which style you need and order the correct one. This cap has the locating tang IN LINE with the attaching clip.

Special Pricing Available In Stock

Performance Spark Plug Wires - For MALE type distributor cap

In Stock

Performance Spark Plug Wires - For Female type Dist. Cap

In Stock

Spark Plug Wire Separator Kit - NEW

In Stock

Spark Plug Wire Support & Separator Kit - NEW

In Stock

Replacement Distributor Cap - RED FEMALE

In Stock

Replacement Distributor Cap - BLUE MALE

Special Pricing Available In Stock