Factory Throttle Return Spring - 1968 4BBL We offer this reproduction of the factory Chrysler 2899327 return spring, which was originally used on 1968 Big Block Four Barrel applications. It also works well for many other applications using the factory kickdown, throttle linkage, etc. This spring features 49 coils.
Six Pack Throttle Return Spring Bracket - Shown above is our exact reproduction of the factory six pack throttle return spring bracket used from 69 1/2 until 1972. It will work on all engines, but is factory correct for those years. These include the small tab that fits into the bolt hole in the head. These make a great general purpose throttle return bracket which looks 100% factory, but will work with most aftermarket intakes which have a raised height. A nice piece at a price which blows the "restoration shops" out of the water.
1967-69 Throttle Return Spring Bracket Shown here is our exact reproduction of the factory big block throttle return spring bracket used from 1967 until 1969. It will work on all engines, but is factory correct for those years. These include the small tab that fits into the bolt hole in the head. These make a great general purpose throttle return bracket which looks 100% factory, but will work with most dual plane intakes. A nice piece at a price which blows the "restoration shops" out of the water.
Braided Stainless Steel Throttle Cable - 24" - Aftermarket Our new aftermarket braided Stainess throttle cable measures a full 24" long, leaving plenty of room for those aftermarket intakes with taller carburetors. The teflon lined sheath reduces friction and can be easily cut to a shorter length if needed for a clean installation. This is just the ticket for a more modern look and function with those aftermarket builds.
Braided BLACK Throttle Cable - 24" - Aftermarket Our new aftermarket braided BLACK throttle cable measures a full 24" long, leaving plenty of room for those aftermarket intakes with taller carburetors. The teflon lined sheath reduces friction and can be easily cut to a shorter length if needed for a clean installation. This is just the ticket for a more modern look and function with those aftermarket builds.
Factory Reproduction Coil Bracket We've made an exact reproduction of the factory Chrysler 1688207 coil bracket used on Big Block, Hemi and 6 cylinder applications. Punched, sheared and plated just as the original was.
Factory Throttle Cable Bracket - RB Only This is a reproduction of the factory Chrysler part number 2780876 throttle control mounting bracket (also sometimes called the Throttle cable bracket.) This bolts on using one of the intake manifold bolts and holds the throttle cable in place. It also provides the pivot axle for the throttle kickdown lever. This works for RB engines only, B engines use a slightly different bracket. This is the same bracket we supply in our complete RB engine kickdown kits. This includes the cable hold down tab and Koni Keps nut with secured washer, exactly as shown in the picture.