Shown here is our Comp Cams 10 degree "Super Lock" Steel Retainers. These are a huge, extremely beefy valve retainer which is designed to fit our Comp "Super Locks," which can be found on our Valve Locks page. This 10 degree lock & retainer system has a wider angle of interference than a standard 7 degree lock. These are fully machined from 4140 Chrome Moly and finished in black oxide. Comp recommends these for any cams over .460" lift (basically anything other than bone stock) but we feel they're absolutely necessary above .510" lift. We highly recommend upgrading to these for extra insurance, and it's required if you will be running a cam over .510" lift. These are supplied in a set of 16, enough to do one complete engine. Since they're Comp, you can be assured of two things: They're 100% made in the USA, and the quality is second to none.
This is a labor charge for us to remove and replace valve springs, seals, locks and retainers. This labor charge must be selected in the same order as the cylinder heads, along with the new valve locks, retainers, seals and springs you want upgraded. Does not include custom shimming each spring to a specific installed height.
This is a labor charge for us to remove and replace valve locks and retainers only, such as when changing from a 7 degree to a 10 degree setup. This basic head labor charge does NOT include replacing valve springs and seals, please select our extended head labor charge if you need valve springs and seals replaced also. This labor charge must be selected in the same order as the cylinder heads, along with the new valve locks and retainers you want upgraded. Does not include custom shimming each spring to a specific installed height.
By accessing and using this site, and/or ordering any merchandise from us, you agree that you have read and are bound by the policies,
terms and conditions set forth in the terms and conditions linked pages above. Please read these policies FULLY before ordering.