Valve Locks (Keepers)-store.440source.com

ACCOUNT INFO

/ //

Image

Item #

Description

Price

145-1002

Comp Cams Super Lock 11/32 10deg. Valve Locks
Shown here is our Comp Cams 10 degree "Super Locks." These are a huge, extremely beefy valve lock which has a wider angle of interference than a standard 7 degree lock. These are fully machined (not stamped) from a super tough fatigue resistant alloy. Comp recommends these for any cams over .460" lift. These fit 11/32 valve stems, which can be found on most aftermarket aluminum heads (such as our Stealth heads or Edelbrock RPM's,) and they work great with our Comp "Super Lock" retainers, part number 145-1003 or 145-1006, which can be found on our Valve Retainers page. We highly recommend upgrading to these for extra insurance. These are supplied in a set of 32, enough to do one complete engine. Since they're Comp, you can be assured of two things: They're 100% made in the USA, and the quality is second to none.

In Stock

145-1011

Comp Camp 11/32 7 deg. Street Valve Locks
These are the Comp Cams 7 Degree stamped valve locks which we supply in our Stealth Cylinder heads. Designed for single groove valves. We offer them separately for service replacement purposes. Complete set of 32 pieces.

In Stock

HEADLABOR2

Extended Cylinder Head Labor - R&R Springs Seals Locks Ret.
This is a labor charge for us to remove and replace valve springs, seals, locks and retainers. This labor charge must be selected in the same order as the cylinder heads, along with the new valve locks, retainers, seals and springs you want upgraded. Does not include custom shimming each spring to a specific installed height.

In Stock

145-1024

Comp Cams Super Lock 10deg. Valve Locks for FACTORY VALVES
We now offer Comp Cams 10 degree "Super Locks for FACTORY 3/8" valves which have the factory Chrysler configuration of 2 grooves on the intake valve and 4 grooves on the exhaust valve. These are a huge, extremely beefy valve lock which has a wider angle of interference than a standard 7 degree lock. These are fully machined (not stamped) from a super tough fatigue resistant alloy. Comp recommends these for any cams over .460" lift. They work great with our Comp "Super Lock" retainers, part number 145-1003, which can be found on our Valve Retainers page. We highly recommend upgrading to these for extra insurance. These are supplied in a set of 32 (16 of the 2 groove and 16 of the 4 groove), enough to do one complete engine. Since they're Comp, you can be assured of two things: They're 100% made in the USA, and the quality is second to none.

In Stock

Comp Cams Super Lock 11/32 10deg. Valve Locks

In Stock

Comp Camp 11/32 7 deg. Street Valve Locks

In Stock

Extended Cylinder Head Labor - R&R Springs Seals Locks Ret.

In Stock

Comp Cams Super Lock 10deg. Valve Locks for FACTORY VALVES

In Stock