SINGLE H beam rod w/ ARP 2000 bolts Single rod for service replacement, etc. purposes. Standard Big Block Chevy (for stroker combinations): Center-Center Length: 6.535" Rod Type: H Beam Journal Size: 2.200" Wrist Pin Size: .990" Big End Width: .994" Bolts Used: ARP 2000, 220,000 PSI Approx. Weight: 770-780 Block Type: B Series: BBC
Replacement ARP 2000 Rod Bolts - 1.600 Length - Set of 2 We offer genuine ARP replacement rod bolts in sets of 2 (for one rod.) This part number is for a SET OF 2. If you are ordering these as upgrades or replacements for a full set of 8 rods, then order 8 of these pairs. These fit our current H-beam rods, our Titanium Rods and our Stock Replacement rods. They are 1.600" length, so if you are using another manufacturer's rods, or an older version of our rods, please verify the length of the bolts you are replacing before ordering. Don't forget to order a bottle of ARP's special Assembly Lube (part number 129-1032) also.
Pin Bushings - Reduces 1.094" Pin to .990" Floating-Set of 8 Use our B1094 Pin bushings when reducing any Chrysler 1.094" pin size rod (stock or aftermarket) down to a fit a floating .990" pin setup. Or, they can also be used as service replacement bushings in aftermarket H-beam type rods with .990" pins. These are .060" wall, for plenty of rigidity. They require installation by a machine shop, as they must be pressed in and sized to fit after installation. We usually recommend about .0007" pin to bushing clearance for most applicatons. Sold in sets of 8.