We carry Comp Mechanical Roller camshafts listed below, (all normally kept on the shelf and ready to ship the same day.) Feel free to give us a call and we'll help select the right cam for your application.
This Comp "Street" Mechanical roller is a great grind for those who want to maximize their power with a roller cam, but who are also planning to put some mileage on the motor and don't want to have to buy new valve springs every 150 miles. In a 500"+ stroker, this cam will make power from about 3000-6500. The .582/.588" lift and 254 intake and 260 exhaust duration at .050" allows for super strong mid and upper range power without sacrificing too much low end for getting around on the street. These are ground on a 110 degree lobe separation angle. We'd use about a 3200 stall, and some decent rear end gears (3.55-4.10 for the street.) The key to the extra longevity with this setup is that this cam is designed to use a slightly lighter valve spring than a full race roller, which greatly increases the service lifetime of all the valve train components (especially the springs.) With this setup, we recommend our 145-1007 solid roller lifters, Comp's 938-16 valve springs, our 145-1003 retainers, and our 145-1002 locks (if you are using valves with 11/32" stems.) Also, this cam uses three bolt timing chain sets. We carry them (along with the required bolts, etc.) on our timing chains page. Don't forget to order Comp lifters and break-in lube (shown below) with your new cam! These items are considered essential to ensure that your cam has the longest possible life and is fully covered under Comp's warranty policy. And, since this is Comp we're talking about, you can be assured of two things: The product is 100% made in the USA, and the quality is second to none.
Comp's redesigned Endure-X™ Solid Roller Lifters Deliver Unmatched Performance & Durability. For years, COMP Cams Roller Lifters have set the standard for solid roller lifter performance and durability. With today’s radical cam lobe designs, higher valve spring pressures and increased rpm ranges, greater demand are being placed on lifters than ever before. In keeping with the heightened requirements, COMP Cams has not only changed the name of their race proven solid roller lifter line, but more importantly, enhanced its durability with a series of innovative upgrades.
New Advancements Virtually Eliminate #1 Cause Of Roller Lifter Failure. Most significant among the upgrades is the addition of EDM Oil Injection™ technology, which ensures the bearing assembly receives a constant flow of pressurized oil. Unlike other lifters that offer pressurized oiling only as an upgrade, EDM Oil Injection™ technology is standard in every Endure-X™ Solid Roller Lifter. This virtually eliminates needle bearing oil starvation, historically the number one cause of roller lifter failure. To further strengthen the bearing assembly, the Endure-X™ Solid Roller Lifters also include needle rollers that are precision sorted by size, evenly distributing loads to avoid premature wear and failure. The COMP Cams® engineers also incorporated a Tool Steel bearing axle to eliminate wear and keep internal bearing tolerances in check for added high rpm durability.
More Standard Features Make Endure-X™ The Choice Of Top Engine Builders In addition to the new upgrades, all Endure-X™ Solid Roller Lifters still contain the features that make them the choice of top engine builders. Every lifter is fully heat-treated, machined to ultra-high tolerances and fully rebuildable. The COMP Cams patented link bar assembly blends all the advantages of a removable link bar with the safety of a captured link bar.
EDM Oil Injection™ Technology – Innovative feature guarantees a constant flow of pressurized oil to the roller bearing assembly via an EDM-bored passage
Precision Sorted Bearings – All needle bearings are precision sorted by size to distribute load evenly, preventing premature wear and failure
Tool Steel Axle – Upgraded bearing axle is made of wear resistant Tool Steel to prolong the life of the roller assembly, particularly in high rpm applications
Removable Link Bar - COMP Cams® patented link bar assembly combines the benefits of a removable link bar with the safety of a captured link bar
Fully Rebuildable - In most cases, Endure-X™ Solid Roller Lifters can be rebuilt yielding twice the service life of other roller lifters. And, since this is Comp we're talking about, you can be assured of two things: The product is 100% made in the USA, and the quality is second to none.
Along with the purchase of any Comp cam and lifters, we also strongly recommend using Comp's engine break in oil additive. CAN BE SHIPPED BY REGULAR GROUND ONLY TO U.S. ADDRESSES ONLY.
Our ARP Camshaft bolt kits are the strongest bolts you can get to attach a 3 bolt cam to a timing set for high horsepower and/or highly stressed applications.
By accessing and using this site, and/or ordering any merchandise from us, you agree that you have read and are bound by the policies,
terms and conditions set forth in the terms and conditions linked pages above. Please read these policies FULLY before ordering.
