TRICK FLOW Pushrods Cut to Fit Pushrod Set 3/8 x .062" Wall

Our new cut to fit pushrod sets are made for use specifically with TRICK FLOW heads. Trick Flows use a considerably longer pushrod since the top of the head was raised up to allow for taller ports, which help to increase the airflow of the head. They are exactly what you need if you don't know exactly what your finished pushrod length should be. These 3/8" .062" wall heavy duty pushrods come with the ball end (bottom end) of the pushrods assembeled, however the top (cup) end comes unassembeled, so that you can cut the tubing down to the exact length you need. Maximum length is 10" (if they were put together without shortening the length,) and these pushrods can be cut down to any length shorter than that. While we recommend cutting the tubing on a lathe for the straightest possible cut, if you are in a pinch, these can also be cut with a cutoff wheel. The ends can be pressed in with a press, or (in a pinch) tapped in with a mallet if necessary. A great way to ensure you'll be getting the correct length pushrods for your TRICK FLOW heads, without having to mess with multiple orders, custom made parts, etc.