Timing Covers & Accessories-store.440source.com

ACCOUNT INFO

Image

Item #

Description

Price

100-1060

Factory Timing cover - U tab - Short - Used
Limited availability WHILE SUPPLIES LAST only!! Offered here is a refurbished factory Chrysler timing cover, part number 4095541, used in 1978 only. This is very similar to the 4027560 cover above, except the tab is shorter and only goes to 10 degrees instead of 20. These were always used with cast crank engines, and make great replacements for later model trucks, ramchargers and motorhomes.

In Stock

109-1520

Timing Cover Bolt Kit
Our timing cover bolt kit includes all self locking bolts to attach the timing cover to the engine. Large underhead flange ensures the clamping load is spread evenly to minimize gasket distortion. Bright zinc plating helps prevent corrosion. A nice kit at a reasonable price.

In Stock

109-1555

Bolt Kit - Timing Cover - Performance 12 Point
Our Performance 12 point bolt kits are a nice looking option that features grade 8 strength, black oxide coating, and with a price that doesn't break the bank. This kit includes all 8 bolts (4 large and 4 small ones) that you need to attach the timing cover to the engine block. Custom matching, small diameter washers are also included with this kit.

In Stock

112-1007

Timing Cover Seal
We now offer replacement timing cover seals. These are the same seals included in our complete gasket kit. We now offer them separately for convenience when doing timing cover swaps, etc.

In Stock

112-1010

Timing Cover Gasket
We now offer replacement timing cover gaskets. These are made from compressed fiber. They are the same gaskets which are included in our complete gasket kit. We now offer them separately for convenience when doing timing cover swaps, etc.

In Stock

121-1011

Timing cover - Chrome Plate - New
Shown here is our BRAND NEW REPRODUCTION chrome plated timing cover.

In Stock

121-1012

Timing cover - Plain Steel - New
Shown here is our BRAND NEW REPRODUCTION plain steel timing cover, ready for paint or powder coating.

In Stock

121-1013

Timing tab - Chrome Plate - New
Chrome timing tab to go along with our 121-1011 chrome timing cover.

In Stock

121-1014

Timing tab - Plain Steel - New
Plain steel timing tab to go along with our 121-1012 plain steel timing cover.

In Stock

121-1062

Premium Black Electroplate Timing Cover
Our new Premium Black Timing Covers are supplied in a very nice black electroplated finish, the same process used in modern replacement body parts. Can be installed as-is or painted if desired. A very nice cover at a great price!

In Stock

121-1063

Premium Black Electroplate Timing Tab
We offer our preminum Black Electroplate timing tabs to go with the covers. These are supplied in a very nice black electroplated finish, the same process used in modern replacement body parts. Can be installed as-is or painted if desired.

In Stock

145-1005

Full Roller Cam Button
Don't forget to order a cam button with your three bolt timing set. These are great for setting the end play on your camshaft. While they are absolutely required for a roller cam, they are also highly recommended for use with a solid or hydraulic to make sure everything is kept exactly where it should be. This full rollerized button is the best one we've found on the market. These work with our 3 bolt timing sets 114-1001 and 102-1004, or any other sets which feature a .750" (3/4") diameter center hole. The length on this button is .715" long. We recommend setting roller cam end play between .005" and .010". These work best with stamped steel type timing covers.

In Stock

164-1000

Belt Drive - Australian Muscle Parts
When you want the best, this is it. AMP has been making belt drives for decades, and no other timing system offers this kind of accuracy, ease of adjustment, super simple cam changes, etc. Change cam timing just by loosening the bolts on the cam gear, and then just slide it to where you want it. An engraved scale includes positive and negative marks up to 10 degrees, in 2 degree increments. If you want to change it by one degree, just put the mark inbetween the two lines. And if you want to change cams, they come right out without pulling the belt drive or oil pan. So no ruined gaskets and minimal mess. Great for the dyno or adjustments at the track. And if you really want to see some jaws drop, run it on the street... This new version is black anodized and includes a German made belt. Fits all big blocks including Hemi's and aftermarket blocks.

In Stock

200-1073

Billet Aluminum Timing Pointer
Another 440 Source exclusive big block Mopar part! These awesome fully CNC machined adjustable timing pointers bolt on to the front of the engine, just like a regular pointer would. They're fully adjustable, allowing you to set TDC exactly where it should be with the damper, etc you are using.

In Stock

200-1163

CNC Machined Billet Aluminum Timing Cover
Our fully CNC machined timing cover is cut from a solid block of 6061 aircraft quality aluminum. It features a .420" thick gasket flange (that's almost a half inch thick!) and is designed to fit under almost all stock water pump housings. An amazing part at a great price!

In Stock

Factory Timing cover - U tab - Short - Used

In Stock

Timing Cover Bolt Kit

In Stock

Bolt Kit - Timing Cover - Performance 12 Point

In Stock

Timing Cover Seal

In Stock

Timing Cover Gasket

In Stock

Timing cover - Chrome Plate - New

In Stock

Timing cover - Plain Steel - New

In Stock

Timing tab - Chrome Plate - New

In Stock

Timing tab - Plain Steel - New

In Stock

Premium Black Electroplate Timing Cover

In Stock

Premium Black Electroplate Timing Tab

In Stock

Full Roller Cam Button

In Stock

Belt Drive - Australian Muscle Parts

In Stock

Billet Aluminum Timing Pointer

In Stock

CNC Machined Billet Aluminum Timing Cover

In Stock